Chap nhan thanh toan
Siêu thị điện máy Bình Minh - Điện máy của mọi nhà
Siêu Thị Thiết Bị Đo Bình Minh
Share |
Ampe kìm đo AC công suất Hioki CM3286-01( 600A,giải đo 5W đến 360KW)

Ampe kìm đo AC công suất Hioki CM3286-01( 600A,giải đo 5W đến 360KW)

Ampe kìm đo công suất Hioki CM3286-01( 600A,giải đo 5W đến 360KW)
Thông số kỹ thuật:
  • Dòng Một pha, ba pha (cân bằng)
  • Đo các chỉ số Điện Áp, cường độ, công suất, tổng điện năng tiêu thụ, điện áp/ mức sóng hài
  • Điện áp dòng AC 80.0 V tới 600.0 V, 1 thang đo, sai số cơ bản : ±0.7% rdg. ±3dgt. (Tần số dòng: 45 tới 1 kHz, True RMS)
  • Dòng điện AC 0.060 A tới 600.0 A, 3 thang đo, sai sô cơ bản : ±1.3% rdg. ±3dgt. (Đặc điểm tần số: 45 tới 1 kHz, True RMS)
  • Công suất [Một pha] 0.005 kW tới 360.0 kW, sai số cơ bản: ±2.0% rdg. ±7dgt. (50/ 60 Hz, hệ số công suất=1) [Ba pha cân bằng] 0.020 kW tới 623.5 kW sai số cơ bản: ±3.0% rdg. ±10dgt. (50/ 60 Hz, hệ số công suất=1) [Ba pha bốn dây cân bằng] 0.040 kW tới 1080 kW sai số cơ bản: ±2.0% rdg. ±3dgt. (50/ 60 Hz, ệ số công suất=1)
  • Cường độ sóng hài Đo sóng hài ở thang thứ 30, tổng biểu thị độ méo hài
  • Chức năng khác [Góc pha *1] lead -180.0° tới lag 179.9°, [hệ số công suất] -1.000 to 1.000 [Tần suất] 45.0 Hz tới 999.9 Hz, PEAK, Phát hiện pha, Hiển thị giá trị Max/ Min value, tự động giữ giá trị đo, so sánh các giá trị đo, công suất ở ước lượng ở dòng 3 pha không cân bằng, TrueRMS
  • Điện Áp Tiếp Đất Lớn Nhất 600 V AC (Quy chuẩn IV) 1000 V AC (Quy chuẩn III)
  • Hệ số đỉnh 6 A/ 60 A thang 3 hoặc nhỏ hơn, 600 A/ 600 V thang 1.6 hoặc nhỏ hơn
  • Độ ẩm và nhiệt độ : -25°C tới 65°C; Độ ẩm nhỏ hơn 80%
  • Nguồn điện: LR03 Pin alkaline × 2
  • Đường kính kẹp: φ 46 mm (1,81 inch)
  • Kích thước và khối lượng 82 mm (3.23 inch) W × 241 mm (9.49in) H × 37 mm (1.46in) D, 450 g (15.9 oz)
  • Phụ kiện: Dây nối L9257 × 1, LR03 Pin alkaline × 2, Túi đựng C0203 × 1, Hướng dẫn sử dụng × 1
  • [Chỉ CM3286-01] Thông báo về thiết bị phát ra sóng vô tuyến × 1
  • Nhà Sản Xuất: Hioki
  • Xuất xứ:  Nhật Bản
  • Bảo hành: 12 tháng
Giá cũ: : 11.664.000 VND
Giá mới: 11.502.000 VND

Hioki clamp meters are best in class handheld current and voltage meters for safely and accurately measuring power lines. The CM3286 clamp on power meter can measure voltage, current, power, power factor, phase angle, reactive power or frequency, as well as detect phase sequence on live lines at any desired point of a single-phase circuit or three-phase circuit. CAT IV 600V, CAT III 1000V Key Features • Display four parameters simultaneously • A handheld power meter that measures from 5 W of power and 60 mA of current Measure power ranging from 5 W at a low current of 60 mA to 360 kW • In addition to current, voltage, and power, measure simple integral power consumption and phase sequence • Features and functions deliver fast and efficient testing • Hold measured values to send them to a smartphone, quick and easy data recording (CM3286-01 only) A comment from the Good Design Award 2017 “The CM3286/CM3286-01 offers an extensive range of measurement functionality in a compact footprint, most notably the ability to check for electricity theft in emerging nations. The award recognizes how the product has carried on Hioki’s proven clamp meter design while offering the functionality and ease of use that customers have come to expect from such instruments, along with a highly socially significant design that demonstrates an understanding of how workers check for electricity theft in emerging nations and applies the results of observing how such products are used in the field in order to create a more useful instrument. One hopes that the product will serve to eliminate the problem of electricity theft.” Data can be downloaded to tablets and smartphones using Hioki’s dedicated apps available from the Google Play or App Store. (CM3286-01 only) Search for “HIOKI” and download the “GENNECT Cross” app. *Android, Google Play and the Google Play logo are trademarks of Google Inc. *iOS is a registered trademark of Cisco Technology, Inc. and/or its affiliates in the United States and certain other countries. *iPhone, iPad, iPad mini, iPad Pro and iPod touch are trademarks of Apple Inc. *Apple and the Apple logo are trademarks of Apple Inc. App Store is a service mark of Apple Inc. *Microsoft, Windows, Windows Vista, and Excel are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. *Company names and Product names appearing in this catalog are trademarks or registered trademarks of various companies. *The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HIOKI E.E. CORPORATION is under license. *For the latest information about countries and regions where wireless operation is currently supported, please visit the Hioki website.

Model No. (Order Code)

CM3286-01 Built in Bluetooth® wireless technology

Note: *The indicated value for three-phase power is based on the assumption of a balanced condition and sine wave without distortion at 50/60 Hz. Accurate measurement is not possible on an unbalanced or inverter controlled three-phase line. Also, if the phase (zero cross) cannot be detected due to significant waveform distortion, it cannot be measured nor displayed. *The power factor / phase angle are values obtained from the zero cross of the current and voltage. If the phase (zero cross) cannot be detected due to significant waveform distortion, it cannot be measured nor displayed.




Get it on Google Play

Broad measurement range

Delivering a broad range of measurements at sites from manufacturing plants to households Accurately measure power from 5 W at a current as low as 60 mA to 360 kW at a maximum of 600 A (single-phase power measurement) Measure power in single-phase to balanced three-phase circuits (with estimated values) (1-phase/ 2-wire, 1-phase/ 3-wire, balanced 3-phase/ 3-wire, and balanced 3-phase/ 4-wire) *The instrument generates estimated power values when measuring 3-phase circuits


Easy-to-see display

Related parameters and connection locations shown on the display at once (Main parameter×1, Sub-parameter×3)


Quick and easy data recording (CM3286-01 only)

When you freeze the measured value, it is automatically transferred to a smartphone or tablet, eliminating the need to jot down readings by hand. You can also create a simple PDF report right there in the field, and save data in CSV format for later editing in Excel. *Available for Android and iOS devices *GENNECT Cross (freeware) is required to use instruments with a smartphone or tablet.


Simple wiring guide

The CM3286 provides a simple on-screen guide indicating how to connect it to a 3-phase circuit.


Built-in AUTO HOLD function

The clamp meters beep when the measured value stabilizes and then automatically hold the display value. This is useful when using the instrument in locations where it is difficult to see the display or press the hold button.


Double warnings with sound and light

When the clamp power meter detects excessively over current or voltage input during a continuity check, it alerts you with a red backlight and beeping tone in order to help prevent accidents.


Quickly check for unbalance

The CM3286 can measure unbalanced power in a 3-phase/ 3-wire circuit by measuring the single-phase power twice and then automatically adding the results. (The instrument can also measure 3-phase/4-wire circuits in three separate measurements.)


Easily check power supply fluctuations

Since it can display maximum (MAX), minimum (MIN), and average (AVG) values, the CM3286 is useful when you need to ascertain the magnitude of fluctuations. And since it can also measure crest (PEAK) values, you can use it to check fluctuations at the crest value level.


Support for large-diameter, high-current measurement

The CM3286 can be used with the optional Clamp On Adapter 9290-10 to measure busbars of up to 55 mm in diameter or 80 × 20 mm. Measure high currents of up to 1000 A AC (or 1500 A for up to 5 min.).


Accurately detect electricity theft

The CM3286 is ideal for verifying electricity theft since it can measure both AC power and current. ● Meter tampering: Detect by comparing electric meter readings and measurements Proper operation of electric meters can be confirmed by comparing meter readings and actual values. ● Direct theft: Detect by measuring current Electricity theft can be detected by measuring current on the power supply side of the illegal connection.


Electricity theft detection-and-report function (CM3286-01 only)

The instrument’s electricity theft detection-and-report function can be used to quickly and easily make measurements and generate reports (CM3286-01 only). Simply follow the measurement procedure to take measurements and photographs at four locations and the instrument will automatically generate a report, complete with photos. Since the report is generated automatically in the field based on captured measurement data, it’s impossible for others to alter the data.

Sản phẩm khác
Hỗ trợ trực tuyến Hanoi
Mr Minh : 0904 499 667
Chat [Mr Minh : 0904 499 667]
Ms Vân : 0932 225 325
Chat [Ms Vân: 0932 225 325 ]
Ms Thảo :0978884915
Chat [Ms Thảo :0978884915 ]
Ms Mùi : 0962208760
Chat [Ms Mùi: 0962208760]
Ms Thủy : 0936476144
Chat [Ms Thủy: 0936476144]
Mr Nam : 0988 764 055
Chat [Mr Nam: 0988 764 055]
Hỗ trợ trực tuyến HCM
Mr Bình :0968 750 888
Chat [Mr Bình:0968 750 888]
Ms Thu Hà : 0904 829 667
Chat [Ms Thu Hà: 0904 829 667]
Ms Hương : 0964 934 177
Chat [Ms Hương: 0964 934 177]
Giỏ hàng của bạn
Trực tuyến: 2
Lượt truy cập: 506165
Copyright © 2009 - 2020 by Binh Minh.
All right reserved

Công ty Cổ Phần Thương mai Dịch vụ và Xuất Nhập Khẩu Bình Minh
Địa chỉ: Số 5,Ngõ 461 Nguyễn Văn Linh, Q. Long Biên, TP.Hà nội
Tel: 024-38751616 và 024-36790555 Hotline: 0904499667

Chi nhánh Công ty Cổ Phần Thương mai Dịch vụ và Xuất Nhập Khẩu Bình Minh Tại TPHCM
Địa chỉ: Số 1331/15/144 Đường Lê Đức Thọ,Phường 14, Q. Gò Vấp, TP.Hồ Chí Minh
Tel: 024-38751616 và 024-36790555 Hotline: 0968750888


Liên hệ để có giá tốt nhất